Plasma using inverter technology guarantees precise and pure cutting to 10 mm thickness. The system is easy in service and corresponding with the cutting thin materials at high speed. The front panel is supplied with clear and transparent graphics for the adaptation of cutting intensity and demonstrations of any data concerning the functioning of the internal systems of safety. Additional protection is made with an adjusting knob on a front panel. After switching on the system of a protecting gun the circuit can be switched on by pressing the reset button. It is suitably adapted for repair shops and the general work in metal.

Specification

Dimensions of the device 250x420x230mm
Weight 14kg

 Electric data

Current supply 1 Ph 230V 50/60Hz
Energy input 60% KVA 3,5
Off-load voltage V 350
Intensity level A 5 ÷ 35
Cutting level 35% A30
Thickness of steel cutting 10mm
Air pressure 5-5,5 bar
Compressed airflow l/min. 100
Insulation level H
Protection level IP 22

Mechanical data

Noise level dBA ≤ 65
Ambient temperature 5 ÷ 35 oC
Surroundings humidity ≤ 90 %

Semi-automatic welding machine, provided with professional rod feeder, with the built-in adjuster equipped with timer. The complete set consists of a gun, earth cable, clamp, pressure regulator and a gas hose. The holder is adapted for wire reels from 5 to 15kg (ø 300 mm). These welding units are intended for vehicle body work and structural metalwork. Półautomat spawalniczy wyposażony w profesjonalny podajnik z wbudowanym regulatorem wyposażonym w czasomierz. Komplet składa się z pistoletu, kabla masowego i zacisku oraz regulatora ciśnienia i węża do gazu. Uchwyt jest przystosowany do szpuli z drutem od 5 do 15 kg (300 mm). Urządzenia te przeznaczone są do pracy przy ramach samochodowych i pracy w metalu.

Specification

Applied voltage 3 pH 230/400V 50/60Hz
Power consumption 60% KVA 5.9
Control voltage 17 ÷ 38 V
Intensity level 30 ÷ 230 A
Conventional intensity 230 35%
176 60%
Setting positions 7
Wire for steel welding 0.6 ÷ 1.0 ø
Wire for rustless steel welding 0.8 ÷ 1.0 ø
Wire for aluminium welding 0.8 ÷ 1.0 ø
Insulation level H
Protection level IP 22
Dimensions of the device 483x825x695 mm
Dimensions of the carton 380x820x615 mm
Weight 63 kg

Semi-automatic welding machine, provided with professional rod feeder, designed for aluminium welding, with the built-in adjuster equipped with timer. The complete set consists of a gun, earth cable, clamp, pressure regulator and a gas hose. The holder is adapted for wire reels from 5 to 15kg (ø 300 mm). These welding units are intended for vehicle body work and structural metalwork.

Specification

Applied voltage 3 pH 230/400V 50/60Hz
Power consumption 60% KVA 3.5
Control voltage 17 ÷ 33 V
Intensity level 30 ÷ 190 A
Conventional intensity 190 25%
130 60%
Setting positions 7
Wire for steel welding 0.6 ÷ 1.0 ø
Wire for rustless steel welding 0.8 ÷ 1.0 ø
Wire for aluminium welding 0.8 ÷ 1.0 ø
Insulation level H
Protection level IP 22
Dimensions of the device 455x805x580 mm
Dimensions of the carton 350x760x540 mm
Weight 50 kg

LABOUR SAFETY
Electric and mechanical solutions applied in the design correspond with European standards.

HEALTH AND COMFORT OF WORK
Mechanical shoulder for actuating a gun does not demand any effort from service.
The economy of energy - the special by-pass valve [of circuits] makes possible the reduction of the power consumption up to 80%, that is 5% less than conductor welding machine.

PROTECTION OF ENVIRONMENT
Closed cooling circuit protects from effluent of dangerous liquids to environment.

HIGH QUALITY OF WELDING
Device with the possessed parameters, mechanical and aesthetic data is ideal for automotive industry.

Specification

Work height 2500 mm (/R 3000 mm)
Maximal radius 2300 mm
Setting positions 7
Dimensions 1030x815x1250 mm
Dimensions of the gun 130x350x320 mm
Weight 150 kg

Electric data

Current supply 1 Ph V/Hz 400/50
Power consumption for 50% KVA 6
Maximum power KVA 24
Fuses A 16
Idle run voltage V 2,7
Secondary circuit KA 8,7
Secondary cycle KA 7,2
Working cycles % 8
Thickness of welded sheets 2 + 2 mm

Mechanical data

Electrode power at 800 Kpa 200 daN
Air consumption for 1000 spots 0,6
Noise level dBA ≤ 65
Ambient temperature ◦C 5 ÷ 35
Surroundings humidity % ≤ 90
Length of electrode arm 150 ÷ 500 mm
Diameter of arm electrode 20 mm
Range of electrode arm 120 mm
Motion of electrode arm 12 ÷ 55