art. 01 Handle with mobile arms It is possible to screw the handle with one or two nuts on a body and then to pull the deformed element.
art. 02 Windscreen and rear window opening rafter (with scale) Rafters are used for giving ruggedness of two points of a body in order not to deform them during stretch flattening (tinsmithing) works.
art. 03 Door-way rafters Rafters are used for giving ruggedness of a door aperture during stretch flattening (tinsmithing) works.
art. 04 Tools for straightening doors
art. 05 Nylon belt 1600 mm The belt is used for stretch flattening of the damaged element so that not to deform it (e.g. a post).
art. 06 Two-way jaw 100 mm (exchangeable jaw pads) The jaw allows to do stretch flattening of a body in two directions.
art. 07 Self-locking jaw 60 mm 10T (exchangeable jaw pads) The jaw makes possible to do stretch flattening of an element of a body without necessity to screw it on a body.
art. 08 Pulling jaw (pincers) The jaw makes possible to do stretch flattening of an element of a body without necessity to screw it on a body.
art. 09a 6T Self-locking jaw 100 mm 6T (exchangeable jaw pads) The jaw makes possible to do stretch flattening of an element of a body without necessity to screw it on a body.
art. 09b 6T Self-locking jaw 60 mm 6T (exchangeable jaw pads) The jaw makes possible to do stretch flattening of an element of a body without necessity to screw it on a body.
art. 10 Jaw with deep input +90o The jaw is used for stretch flattening the difficultly accessible elements of a body in three directions.
art. 11 Chains joining hook The hook is used for joining two chains.
art. 12 Jaw with mobile handle The jaw is used for stretch flattening in one plane of edge of a body.
art. 14 Chain connector Chain connector is used for joining two chain links.
art. 15 Jaw for edges The jaw is used for fastening on edge of a body and for stretch flattening in one direction.
art. 16 Narrow jaw 45 mm The jaw is used for fastening on edge of a body and for stretch flattening in one direction.
art. 17 Szczęka szeroka 100 mm (wymienne wkładki szczękowe)
art. 18 Pulling plate The plate is used for joining the body’s hole with a chain.
art. 19 2m. chain + hook The chain is used for joining the jaw with a pulling tower.
art. 21 Jaw for roof tightening
art. 22 Three-direction jaw MULTI The jaw is used for stretch flattening the elements of a body in three directions
art. 24 Clamping handle The handle is used for straightening e.g. a car threshold.
art. 25 Wing grab A22-24 mm; B 18-20mm
art. 26 Mc Pherson socket straining kit.
art. 27 Mc Pherson socket straining plate
art. 28 Arm with 3 ends (Boomerang) The boomerang is used for stretch flattening the difficultly accessible places.
art. 29 Manoeuvring trolley The trolley is used for fastening the front or back of the car without wheels raising mobility of the damaged machine during repair.
art. 30 Car transposing device (Slalom 1) The device is used for lifting a wheel of a car that allows the further movement of the machine, e.g. in car showrooms or at blocking a wheel during wreck.
art. 31 Car transposing device (Slalom 2) The device is used for lifting a wheel of a car that allows the further movement of the machine, e.g. in car showrooms or at blocking a wheel during wreck.
art. 32 Windscreen installing device "The device (suckers) is used for supporting for a glass during installation."
art. 33 Small body-dent repair device (220 Volt)
art. 35 Hydraulic dismantling kit 12 T (brand product)
art. 36 Pneumatic pump (with hose; brand product) 700 bar
art. 37 Manual pump (brand product) 700 bar
art. 38 Hydraulic puller 6T, range 200 mm
art. 39 12 T servo, pitch 250 mm (brand product)
art. 40 Tool for bending metal sheets & making holes
art. 41 Body saw
art. 42 Weld reamer Ø8
art. 43 Glass cutter
art. 44 Pneumatic drill 10 mm
art. 45 Pneumatic hammer
art. 46 Universal stand for body elements
art. 47 Engine support "The support is used for lifting the engine leaning on mudguards of the car."
art. 48 Telescopic compass 3m for body measurement
art. 49 Tool trolley
art. 50 Hydraulic car elevator. Lifting capacity 1500 kg (recommended for the device L4MA)
Tel. +49 3379 321302 |
Mob. +49 177 4868147 | ||
Fax. +49 3379 321423 |
info@unicar24.de |