Device COMBI, has resulted from connection of device PRIMAMIG 205AL, with device SPOT 85.
It is the connected system of welding, designed of 3-phase welding machine and provided with one supplying cable. This device allows to solve each problem connected with repairing and welding, reducing time and a place. Specifications are the same as in the separate machine on the basis of which it has arisen.
PRIMAMIG 205AL differs with high range of resetting and has a semi-automatic welding device provided with professional rod feeder, designed for aluminium welding, with the built-in adjuster equipped with timer. The complete set consists of a gun, earth cable, clamp, pressure regulator and a gas hose. The holder is adapted for wire reels from 5 to 15kg (ø 300 mm). These welding units are intended for vehicle body work and structural metalwork.

Specification
Torch for welding machine 3000
Welding cable 2200x150
Dimensions of the device 350x520x200
Dimensions of the set 455x805x960
Dimensions of the gun 75x155x140
Weight 105

Electric data
Current supply 3 Ph V/Hz 230-400/50
Power consumption for 50 % 25% A190
Maximum power 60% KVA 3,5
400V Fuses A 16
Idle run voltage V 17/33
Secondary short circuit KA 8,5
Secondary cycle KA 8,2
Working cycles % 5
Thickness of welded sheets 2 + 2 mm
Cable for steel welding 0,6-08 mm
Cable for aluminium welding 1,0 mm

Mechanical data
Electrode power at 800 Kpa 190 daN
Air consumption for 1000 spots 0,4
Noise level dBA ≤ 65
Ambient temperature ◦C 5 ÷ 35
Surroundings humidity % ≤ 90
Length of electrode arm 150 ÷ 500 mm
Diameter of arm electrode 18 mm
Range of electrode arm 120 mm
Motion of electrode arm 15 ÷ 40